Drives + Configuration Software
- Sensorless Vector or Space Vector
- Variable or Constant Torgue
Permain Basin Oil Show 2020
Advanced Industrial Devices (AID)
Pump Off Controller (POC)
Unitronics Vision V570 PLC+HMI "All in one"
POC Oil Well downhole Dynamometer Card Functionality
Unitronics Vision V570 or V1210 PLC+HMI "All in one"
Unitronics Vision PLC+HMI "All In One" Complete Range of Vision series PLC+HMI with Powerful Programming Software and Outstanding Support!
Texas Water 2020
July at George Brown Convention Center, Houston
Butler and Land - Pump Werx
The Unitronics NEW UniStream "Built In" 5 and 7 inch HMI/PAC will be Featured.
The Unitronics NEW UniStream "Modular" HMI/PAC Capabilities will be the Product Focus.
OffShore Technology Conference
Celebrating 51 Years
August/September at NRG Park, Houston
TExas Sensors & Controls
Booth No. in the NRG Arena
Unitronics Featured Products:
New UniStream "Built In" 5 and 7 inch HMI/PAC
New UniStream "PLC" with virtual HMI
Control your Application Remotely
"AnyWhere AnyTime" with Virtual HMI's!
Unitronics Product Capability's Focus will be on UniStream OPC UA and MQTT
TExas Sensors & Controls
TSC will be featuring;
Vision RTU Gateway Capabilities
Cost Effective Connectivity and Data Logging Applications:
Networking Communication Protocols for Interoperability
- Modbus RTU Serial
- Modbus TCP Ethernet
- Siemens ProfiBus Serial
- Allen-Bradley DF1 Serial
- Isolated RS232 / RS485 Serial
- Ethernet TCP/IP Port with 4 Sockets [V700 has 8 Sockets]
- Optional Ethernet 3rd Party Cell Data Router for SCADA
- CAN Bus SAE J1939 Engine Monitoring Serial
- CAN Open or UniCAN Serial
- Centurion 3G Cell Modem Kit for Serial Port
- Optional Enfora / Novatel Spider 3G/4G Cell Modem
NOTE: Only a max of 6/7 of these Listed Protocols can be connected simultaneously on the V350 or V430, because there is one spare Card slot space for Ethernet or Serial, but up to 7/8 can be connected on the V570 or V700.
Vision PLC+HMI SOLUTION
Complete Range of Vision series PLC+HMI with Powerful Programming Software and Outstanding Support!
THE UniStream Programmable Automation Controller; PAC+HMI is offered in 2 different 7 inch versions and 2 different 10 inch Models, including multi touch, but the large 15.6 inch is the most popular size.
There are the UniStream 'Modular" Types and also "BuiltIn" Types available in 5 inch or 7 inch.
UniStream PAC+HMI can have up to 3 Local HMI's of different sizes connected simultaneously as a Master to Slaves via VPN, plus UniStream can connect to "Virtual" HMI'S like Cell phones and Tablets, utilizing the UniLogics Software/Firmware Remote Capability's and the dual Ethernet Network Ports.
UniStream PAC+HMI can be configured as a redundant System for Critical Process Applications and it has Interoperability connectivity with "Smart" or Intelligent Sensors utilizing the Ethernet IP - ODVA Tested and Compliant Allen-Bradley/Rockwell Automation Protocol.
UniStream PAC+HMI differences as compared to the Vision series PLC+HMI "All in One", are the optional Communication Modules, the Intelligent "SMART" Combination I/O Modules, as well as the faster Processor Speed.
UniStream is a Linux Programmable Automation Controller (PAC) with a separate CPU that plugs into the back of the HMI.Unitronics UniStream PAC+HMI does more! Ray W Zimbal Jr.Automation Application Engineering & Sales
Motors, Drives & Gears + Controls LLC
DFW Area Phone - (817) 307-1274
Houston Area Phone - (713) 835-9753
alternate e mail - RWZimbal@Verizon.net